High Level of air bubbles
Air bubbles are the most common cause of cloudy white water from your faucet. It is harmless and potable, yet it is better to ask a professional plumber and take a safety check. These air bubbles can get trapped in the water and pipes due to changes in water supply pressure, damaged pipes, leak in plumbing lines, and faulty plumbing works.
You can also check if air bubbles are the reason for water cloudiness by leaving a glass filled with water for a few minutes. If the cloudiness rises to the top in the form of air bubbles, your water is safe for drinking. If the white color stays, there might be a serious issue demanding professional assistance.
High TSS Concentrations
TSS stands for total suspended solids and refers to all the solid impurities that do not settle at the bottom and remain suspended in the water. These impurities include silt, sediments, clay, algae, and other metal ions, which are small enough and support bacterial growth in the pipelines.
High TSS contents can result from a recent construction activity that created a ground disturbance, and the nearby water pipelines got disturbed. You can check for the level of TSS by passing the water through a standard filter, and if it comes clear, you should call JP Plumbing Services for help.
Presence Of Hard Water
Hard water is similar to high TSS contents in terms of impurities. Suppose the cloudiness in your water never clears. In that case, the water leaves white spots after washing, and your clothes get stiff and lose color during washing. Hard water is confirmed if a white layer of mineral deposits forms over the water appliances.
You can easily find the mineral deposits in the sink as a white layer of calcium and magnesium around the pipelines. It is not suitable for drinking due to the rocky sediments from the terrain. You should ask your plumber for a water softener and a filter to remove the hard water impurities without damaging the pipework and water transport.
Presence Of Methane Gas
Methane is a colorless, odorless, and tasteless gas considered safe at a concentration of 10 mg/L or below. It is commonly found near wells and causes the water to sputter when the faucet is on. Our skilled plumber will perform a series of assessments to determine if the methane concentration is treatable and what safety measures need to be taken urgently.
Most people prefer to install an aeration system that expels methane gas from the water supply. A well-vented cap is suitable for moderate methane concentrations, while the aeration system is apt for concentrations above 28 mg/L.
Get a skilled and certified professional for faucet repair in Argyle, only at JP Plumbing. Contact us now to discuss the task at hand and avoid potential water supply issues in the future.